Small Aluminum Metal Scrap Baler Baling Press Machine

Product Descriptionsmall aluminum metal scrap baler baling press machinedirectly compacts the powder and granular iron castings, steel scrap, copper scrap, aluminum scrap and high quality mineral powder into cake blocks, so as to facilitate storage, transportation and reutilization. Briquet furnace for recovering low loss after use. The whole process of production does not need heating, adding additives or other processes, directly cold pressing, forming the same material at the same time to ensure that the same. For example, cast iron scraps are used instead of cast iron. For the special material of the castings, the recovery is more significant.  Model Nominal thrust (kn) Dimension of compress room  (mm) Bale dimension (mm) Bale weight (kg) Capacity (t/h) Power (kw) 63 630 1000*600*500 190*190 15-30 0.4-0.8 7.5 100 1000 1000*700*550 230*230 30-40 0.6-1.2 11 125 1250 1200*700*600 300*300 50-75 1.2-1.5 15 135 1350 1400*600*600 600*240 60-80 1.5-2.8 22 160 1600 1600*1000*800 400*400 110-150 2.2-3.0 22 200 2000 1800*1400*900 450*450 210-300 3.0-5.0 22*2 250 2500 2000*1750*1200 500*500 250-280 5.0-6.3 22*2 315 3150 2500*2000*1200 500*500 250-360 4.0-6.5 37*2 400 4000 3000*2000*1200 500*600 250-380 6.8-8.0 45*2 Product DetailsMain Features of scrap metal compactor baler1 The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance.2 The discharging types fall into turning over, push out ,forward out and manual lifting.3 It is unnecessary to fix foot screw and a diesel engine can be used in case of power supply unavailability.4. Smooth operation; computer control, high degree of automation, low failure rate, easy maintenance and so on.5. High strength, good stability.6. The hydraulic station system uses a unique cooling system, so that the oil temperature is not easy to rise.ApplicationScrap metal baler is suitable for the aluminum alloy factory, steel casting factory, aluminum casting factory, copper casting factory, etc. to compress and pack the aluminum chip, steel chip, iron chip and copper chips for melting down, It can replace the waste steel, pig iron, aluminum ingot and waste copper as row materials and reduce the fire loss. This scrap metal baler can press coldly the cast iron chip, steel chip, copper chip and aluminum chip into 3-6Kg cylinder caky blocks, easy for transportation, furnace casting, during the whole course of which ,the temperature adding and the additive or other craftwork are not needed.Packaging & ShippingInner package: Plastic packingOuter of baler machine: Wooden caseDelivery of baler machine: Within 20 days after the orderOur ServicePre-Sales:Act as a good adviser and assistant of clients,enable them to get rich and competitive from the returns of their investment.1.Select suitable equipment model.2.Design and manufacture products according to clients special requirements.3.Train technical personnel for clients.4.Professional suggestion for customer.Service During The Sales:Respect clients,devote ourselves to improving the total value of clients.1.Take photos(including raw material,semi-products,final products and loading products).2.Pre-check and accept products ahead of delivery.3.Prepare all clearance documents,so that the customer clearance smoothly.After-sales service:Provide considerate service to minimize clients worries.1.Provide civil engineering drawings of the equipment.2.Free training(including installation, maintaince) to every customer.3.Install and debug the equipment,ensure the dryer running smoothly.Our Company /* March 10, 2023 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1