Cisco Cp-8845-K9= Cisco IP Phone 8845 Office VoIP Phone

  Product DescriptionCP-8845-K9 SpecificationCP-8845-K9 SpecificationsHardware FeaturesErgonomic design  The phone offers an easy-to-use interface and provides a traditional telephony-like user experienceGraphical display  The 800 × 480, 24-bit color, 5-in. WVGA display provides scrollable access to calling features and text-based XML applicationsVideo  720p HD video (encode and decode)  H.264/AVCHandset  The handset is a standard wideband-capable audio handset (connects through an RJ-9 port)  The standard coiled cord has a custom end for concealed cable routing beneath the phone (cord length is approximately 21 in. [55 cm] coiled and up to 72 in. (183 cm) extended)  The handset is hearing aid-compatible (HAC) and meets Federal Communications Commission (FCC) loudness requirements for the Americans with Disabilities Act (ADA). You can achieve Section 508 loudness requirements with industry-standard inline handset amplifiers such as Walker Equipment W-10 or CE-100 amplifiers. The dial pad is also ADA-compliantSpeaker phone  A full-duplex speakerphone gives you flexibility in placing and receiving calls with hands free. For added security, the audible dual tone multifrequency (DTMF) tones are masked when the speakerphone mode is used.Analog headset  The analog headset jack is a standard wideband-capable RJ-9 audio portAUX port  You can use an auxiliary port to support electronic hookswitch control with a third-party headset connected to itEthernet switch  An internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet network (IEEE 802.3i/802.3u/802.3ab) through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC  The system administrator can designate separate VLANs (IEEE 802.1Q) for the PC and phone, providing improved security and reliability of voice and data trafficBluetooth  Bluetooth 4.1 LE, Enhanced Data Rate (EDR) Class 1 technology (up to 66-ft [20m] range) is supported  Hands-Free Profile (HFP) is supported for untethered headset connections and voice communications  Phone Book Access Profile (PBAP) is supported for phone book object exchange between devicesKeys  The phone has the following keys:   Line keys   Soft keys   Back and release keys   Four-way navigation and select keys   Hold/Resume, Transfer, and Conference keys   Messaging, Application, and Directory keys   Standard keypad   Volume-control toggle key   Speakerphone, headset, and mute keysBacklit indicator  The phone supports backlit indicators for the audio path keys (Handset, Headset, and Speakerphone), select key, line keys, and message waitingReplaceable bezel  The phone includes a black bezel; an optional silver bezel is also orderable separatelyDual-position foot stand  The display is easy-to-view and the buttons and keys are easy-to-use. The two-position foot stand supports viewing angles of 35 and 50 degrees; you can remove the foot stand for wall mounting, with mounting holes located on the base of the phoneWall-mountable  You can install the phone on a wall using an optional wall-mount kit (orderable separately)Physical security  The phone is compatible with the Kensington Security Slot (K-Slot) antitheft systemPower FeaturesIEEE Power over Ethernet (PoE)  PoE on the phone is IEEE Power over Ethernet class 2. The phone is compatible with both IEEE 802.3af and 802.3at switch blades and supports both Cisco Discovery Protocol and Link Layer Discovery Protocol - Power over Ethernet (LLDP-PoE)Cisco IP Phone Power Cube 4  This optional power cube is used as an AC-to-DC (48V) power supply for non-PoE deployments. Use of the power cube 4 also requires the use of one of the corresponding AC country cordsCall-Control SupportCisco Unified Communications Manager  8.5.1 (non-secured mode only)  8.6.2  9.1.2  10.5.2  11.0 and laterCisco Unified Communications Manager Express(Unified CME)  Planned to be supported 11.5Cisco Business Edition 6000 (BE 6000)  8.6.2  9.1.2  10.5.2  11.0 and laterCisco Hosted Collaboration Solution (HCS)  8.6.2 and later (using supported UCM versions listed previously)FeaturesSpecificationsAudio codec support  G.711a-law and mu-law, G.722, G.729a, Internet Low Bitrate Codec (iLBC), and Internet Speech Audio Codec (iSAC)Call features  + Dialing  Abbreviated dialing  Adjustable ring tones and volume levels  Adjustable display brightness  Agent greeting  Application launch pad  Auto-answer  Auto-detection of headset  cBarge  Busy Lamp Field (BLF)  BLF Pickup  BLF speed dial  Callback  Call forward  Call forward notification  Call filter  Call history lists  Call park  Call pickup  Call timer  Call waiting  Call chaperone  Caller ID  Corporate directory  Conference, including traditional Join feature  Cross-Cluster Extension Mobility (EMCC)  Direct transfer  Extension mobility  Fast-dial service  Forced access codes and client matter codes  Group call pickup  Hold  Intercom  Immediate divert  Malicious-caller ID  Message-waiting indicator (MWI