50um Nylon Vacuum Bagging Film for Yacht

A SERIES OF MATERIALS USED FOR VACUUM CONSUMABLES:1) RELEASE FILM:RF35 Perforated Release Film is a red/blue color PE release film that is designed for low cost applications. It will release from epoxy, polyester and vinyl ester resin systems. It is  suitable for resin cure temperature up to 250°F (121°C).Reference:Example:RF35-1200-500Material: PEThickness: 35umWidth:1200mmLength:500mApplication:Perforated Release Film RF35 is most commonly used in vacuum infusion processing.Features And Benefits:    Red/Blue color is visible on laminate surface.Good value for low to medium temperature applications.Available in P16 perforation style, especially for infusion applications. Technical Parameters:Material type:                                PE  Elongation at break:                     500 %                                        ATP 5042Tensile strength:                          4350 psi (30 MPa)                     ATP 5042Maximum use temperature:         250°F (121°C)  Materials to avoid:                        Phenolic resins/Strong oxidizersColor:                                            Red/blue  2) Vacuum Bagging Film:Vacuum bag BF65 is a wide multi-layer extruded Nylon film providing multiple layers of safety. These multi layers reduce the concerns of pinholes,Weak spots, brittleness and inconsistency in films. This Vacuum bag is strong, has a high elongation and is suitable for cure temperature up to 170C.We provide various width and roll length , for more information please contact us.Features:High temperature resistance suitable for multi resin systems.Wider films save time and money spent seaming film for large parts.Reduce scrap risk due to vacuum loss with multi-layered vacuum security.Wider films and good mechanical strength reduce risk of scrap parts due to leakage at seams.Application:Vacuum bagging applications .(not recommended for autoclave application).Typical Specifications: Physical PropertyUnitsSpecificationTest MethodThicknessum65 Material-Nylon,Multi-Layer Color-Ligth Yellow Working TemperatureCMax 170 Elongation%350ASTM D882Tensile strengthMpa34ASTM D882Roll WidthmMax 12-Roll lengthmMax 200-Forms-V,W Fold-3) Infusion Mesh:Resin distribution media IM120 is HDPE extruded net/mesh designed to assist resin flow through your part during the VARTM process. Our resin distribution medium works well with polyester ,vinyl ester and epoxy resins. This resin distribution media is low profile and tight construction, the resin flows more easily and efficiently (little waste) throughout the lay-up when using this resin distribution media.We provide different area weight and width, for more information please contact us.Features:Low resin waste.This product is an extruded net/mesh and does not fray when cut.The color fastness is good under working temperature, will not contaminate the products.Application:Resin distribution of Vacuum bagging applications.Typical Specifications:Physical PropertyUnitsSpecificationPhysical PropertyUnitsSpecificationThicknessmm1.0+-0.2Thicknessmm1.0+-0.2WidthmMax 4WidthmMax 4Lengthm100Lengthm100Color-GreenColor-GreenMaterial-HDPEMaterial-HDPEWorking TemperatureC120Working TemperatureC120Style-WeaveStyle-RhombicArea Weightg/m2120-240Area Weightg/m2100-2404) Spiral Tube:This plastic spiral tube is made of HDPE and used to provide a very free‐lowing channel through which the resin is distributed near the point where the resin is first fed into the composite. Resin flows freely through the center of the spiral tube, but just as easily out of the spirals in the side, allowing resin to be supplied all the way along an edge of the composite.Features:Low material cost.HDPE material, strong tube wall makes the spiral tube not deformed under atmospheric pressure.Application:Resin distribution of Vacuum bagging applications.Typical Specifications:Physical PropertyID*OD(MM)ID*OD(MM)ID*OD(MM)ID*OD(MM)ID*OD(MM) 8*1010*1212*1416*1919*23MaterialHDPEHDPEHDPEHDPEHDPEThickness1mm1mm1mm1.5mm2mmColorWhiteWhiteWhiteWhiteWhiteWorking Temperature120C120C120C120C120CLength100m100m100m100m100m5) Sealant Tape:Sealant tape ST12 is synthetic rubber sealant tape used to provide a continuous airtight seal between the vacuum bag and the mold around the perimeter of the mold. The sealant tape may also be used to seal the point where the manifold enters the bag and to repair leaks in the bag or plumbing.The sealant tape ST12 is a cost effective vacuum bag sealant tape for room and medium temperature applications. It has been specially formulated to provide excellent tack, firm feel, good clean-up and long shelf-life.Features:Lower material cost.Long shelf life reduces waste.Easy clean up reduces cost and times of tool cleaning.Different tack version has better tack for different environments, easy to use.Application:Vacuum bagging applications. (Not recommended for autoclave application).Typical Specifications:Physical PropertyUnitsSpecificationTest MethodThicknessmm3 Widthmm12 Lengthm15 Color-Yellow M