Description:Suspension clamp is mainly used for overhead power lines. The conductor and lightning conductor are suspended on the insulator string or the lightning conductor is suspended on the pole tower through the connection of metal fittings. It is made of High

2024-04-07

Pole-mounted Air/Load breaker switch GeneralThe air break switches install in outdoor and mainly use for switching and isolation. The air break switch is mostly installed in the distribution network as a switching point. It interrupts the small excitation current of a

2024-04-07

Composite InsulatorFeature· High mechanical strength, epoxy fiber glass rod tension strength is double of normal steel, 8-10 times of porcelain materials· High performance against pollution & flashover, the wet withstand voltage is 2-2.5 times of porcelain insulator at

2024-04-07

DESCRIPTIONLRFW-12/24/36 pole-mounted load breaking switch is used to rated voltage 24KV, rated current 400/630A, 50/60 Hz power grid open circuit, load current in closed power system, overload current. This load switch can separate those broken distribution line

2024-04-07

What is a Stay Insulator?Stay insulator is a type of strain insulators, it is widely used in medium and low voltage lines for rural and railway. Stay insulator is also called guy insulator or egg insulator.The stay insulator is usually mounted in the middle of a stay

2024-04-07

SERVICE CONDITIONS 1. ambient temperature of :-40ºC~+40ºC 2. altitudes of not exceeding 2000m (high altitudes areas should  indicate) 3. power frequency of 48Hz~62Hz 4. wind speed of not exceeding 35m/s 5. seismic intensity of not exceeding 7 degrees PRODUCT MODEL

2024-04-07

Our product are fully comply with the standard    such as IEC, BS, ANSI  and other well recognized stand and requirement.  We strongly believe in the importance of maintaining high quality in all our products. We have brought in advanced quality tests as to ensure

2024-04-07

What is a Stay Insulator?Stay insulator is a type of strain insulators, it is widely used in medium and low voltage lines for rural and railway. Stay insulator is also called guy insulator or egg insulator.The stay insulator is usually mounted in the middle of a stay

2024-04-07

Product DescriptionHot Dip Galvanized Steel Eye NutsDescriptionThis eye nut is specifically designed for dead ending and for attaching the pole head guys into thecross arm bolts. The eye nut can also be used for back guying on a power line.Eye nut for power line comes

2024-04-07

Product Property:APG is used for connectingor branching AAC, AAAC or ACSR overhead conductors. Forging creates a high strength clamp. Slotted holes allow adjustment for varying conductors on each side. Its type test report is in accordance with IEC 61238-1. Products

2024-04-07