Desc:Introduction to SDAThe self-drilling hollow anchor system performs drilling, anchoring and grouting in one step. It allows air and water to freely pas...

2024-01-23

Desc:Tricone Roller Drill Bit Product Description ProductTricone BitModelTCI BIT, STEEL TOOTH BITIADC CODE116 117 126 127 136 137 216 217 226 316 317 326 3...

2024-01-23

Desc:Thread Button drill BitThread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling t...

2024-01-19

Desc:Good Quality Tungsten Carbide Rock Drilling Tools Round shank BitProducts DescriptionProduct: 1.Carbide size:19-35MM2.Material:Tungsten carbide and hi...

2024-01-15

Desc:Product NameMaterial GradeCompositionPhysics PerformancesizeTungsten carbide Drill BitsYG8WC91.7%~92%Co8%~8.3%Hardness89.5~90.5HRADensity14.6~14.85...

2024-01-11

Desc:17 1/2" steel tooth tricone bitApplicationTricone Bits are widely used in Petroleum & gas ,water well ,mining and tectonic industries ,oil field, cons...

2024-01-23

Desc:T45 76mm Threaded Rock Drill Bit Hard Rock Drill Bit Mining BitsComparing with tapered chisel bits and tapered cross bits, button bits has higher tech...

2024-01-19

Desc:Product NameMaterial GradeCompositionPhysics PerformancesizeTungsten carbide Drill BitsYG8WC91.7%~92%Co8%~8.3%Hardness89.5~90.5HRADensity14.6~14.85...

2024-01-11

Desc:Products Description89mm T45 Threaded Drill Bits Rock Drilling for Bench&Long hole drillingPart No.3089T4513 Bit Diameter: 102mm Thread: T45 Button Bi...

2024-01-23

Desc: Cemented Carbide 1. 100% raw material to produce tungsten carbide products. 2. Hip sintered, high hardness, high wear resistance 3. Various sizes an...

2024-01-23

Desc: Cemented Carbide 1. 100% raw material to produce tungsten carbide products. 2. Hip sintered, high hardness, high wear resistance 3. Various sizes an...

2024-01-23

Desc:Product DescriptionTapered Bits Description:(1)Connect shank Size: 19mm, 22mm, 25mm at most(2)Bit Diameter: 30mm,32mm,34mm,36mm, 38mm,40mm,41mm,43mm,4...

2024-01-23

Desc:Product DescriptionTapered Bits Description:(1)Connect shank Size: 19mm, 22mm, 25mm at most(2)Bit Diameter: 30mm,32mm,34mm,36mm, 38mm,40mm,41mm,43mm,4...

2024-01-23

Desc:Product DescriptionHRC45/HRC55/HRC58/HRC60/HRC65Endmill& DrillCoated:Altin/Tialn/Tisin/Tin/DLC/Nano/Diamond1.Can be used for the processing of copper,...

2024-01-23

Desc:Product DescriptionHRC45/HRC55/HRC58/HRC60/HRC65Endmill& DrillCoated:Altin/Tialn/Tisin/Tin/DLC/Nano/Diamond1.Can be used for the processing of copper,...

2024-01-23