8m NPN Laser Safety Switch, Retro-Reflective Photoelectric Sensor for High Speed Door, Rolling Shutter Door and Automatic Revolving Door

PF50 series photoelectric sensor/photoelectric switchDetailed product descriptionfeature:1) Stable performance2) Standard volume3) Convenient positioning and high precision4) Various types to choose from5) Wide voltage range6) Dustproof, sunscreen, waterproof, high temperature resistant, adapt to bad weather7) With short circuit protection and reverse polarity protection8) One-piece design to prolong the service life9) Using temperature-resistant, oil-proof resin inside10) IP67 protection structure (IEC specification)Product DescriptionPF50 series photoelectric sensor is the best sell model, the product with an integrated molding process can be used both indoors and outdoors. The product with an aspheric optical lens can eliminate light interference effectively, Free voltage10-30V DC & 12-240V DC/AC for selecting which can meet customers' different demands. This Series includes through-beam type, Retro-reflective type, and diffused type, for reflective type there are infrared light and laser for selection.PF50 series photoelectric sensor is mainly used for automatic doors, intelligent parking, turnstile gates, boom barrier for people, and vehicle protection The product has three major features:The detection distance of 8 meters meets the needs of most automatic doors.Laser light source, easy to calibrate and debug.And it is a polarized sensor, which can still accurately detect highly reflective objects.It is mainly used in industrial doors and intelligent parking fields.Detailed Photos    Product Parameters    Performance ParameterPhotoelectric sensorPF50R-ARF-WElectrical ParameterPower Supply12~24VDC±10% (Ripple p-p: less than 10%)Current Consumption60mA max.@24VccControl OutputRelay output (contact rating: 30VDC, 3A or 250VAC, 3Aresistant load; contact component: 1C)Mode of ActionLight on or dark on through the model selectionProtection CircuitReverse polarity protectionPower LEDGreenAction LEDRedMechanical ParameterAppearance Size50mm × 50mm × 20mmShell MaterialABSLens MaterialPMMAConnection Type2m cableWire SpecificationΦ5, 5 × 0.2mmEnvironmental ParameterOperating Temperature-25~50ºCStorage Temperature-30~70ºC (with no icing or condensation)Ambient Humidity35%~85%RHAmbient IlluminationSunlight 100000Lux; Incandescent lamp 3000LuxProtection ClassIP67Insulation Resistance20MΩ min.500 VDC for 1min between current-carrying partsDielectric Strength500VAC at 60Hz for 1min between current-carrying parts and caseVibration Resistance10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y and Z directionsShock Resistance11ms (30G) 6 times each in X, Y and Z directions  Installation InstructionsProduct ApplicationProduct Installation & Maintenance Product installation:The installation of the photoelectric sensor is relatively simple, as long as the sensor is installed on the fixing frame, does not be blocked by other things, and ensures the working state is good.Product maintenance:Carry out regular inspections to check its sensitivity and some relatively safe measures. The use of these measures is also the most primitive function of our equipment for protection. For the maintenance of the application switch, we still have to do that we need to regularly Scrub or remove some dirt because only in this way our switch will not have some problems with sensitivity. Although the product has IP67-level protection facilities, the product cannot be immersed in water for too long. Therefore, when the product is used outdoors, be sure to check the product after encountering heavy rain.CertificationsThere are 6 main products used in the industrial segmented door, namely microwave radar sensor, 3D person-car separator, economical light curtain, photoelectric sensor, reflector photoelectric sensor, and loop coil detector.G-TEK's single-beam photoelectric sensors and light curtains are the first choices for protecting and monitoring all types of automatic industrial doors, high-speed doors, sectional doors, garage doors, gates, and loading/docking applications. G-TEK's durable, high-performance and sophisticated sensor systems are designed to perform continuously in the most demanding door applications and environments, making them suitable for exteriors that are directly or indirectly exposed to harsh outdoor environments including sunlight, rain, dust, snow installation, and fluctuating temperatures. Additionally, the wear-resistant design of the G-TEK sensor makes it the first choice for the most challenging door installations, including refrigerated doors.Specific product model:1. Microwave radar sensor - GMR series2. 3D man-car separator - GDC11023. Economical light curtain - LSE series4. Photoelectric sensor - PMF 50T5. Reflector photoelectric sensor - PMF50R6. Toroidal coil detector - GVD seriesThe difference between the normal version and the laser version of PF50R PF50R mirror reflection type1. Aspherical optical lens to eliminate light interference2. Easy to install, it can be fixed on the wall by using the bracke