Product DescriptionPT12 series mini-shape photoelectric
sensor features:1. A "Snap-In" mechanism and 45°outlet mode allow
fast mounting in mounting in a mounting hole with a 12.5-13.5 mm
diameter.2. The Mini shape can be applied to the miniaturization of
devices3. Level 2 safety circuit design to be used for fault
detection of the sensor4. Epoxide resin sealing is suitable for a
rugged environment.PT12T series is one compact design mini-shape
photocell. This product can be used indoors and outdoors and is one
popular choice for automatic sliding doors, a revolving door for
anti-pinching, and also applied to turnstile gates for personal
security.Detailed Photos Product
ParametersProduct ParametersPhotoelectric sensorPT12T/VDetection
typeOpposed typeDetection objectMinΦ20mm opaque object Detection
distance10mSupply voltage10-30v DCNo-load currentEmitterMax.
12mAReceiverMax. 3mA.Response timeMax.4.4ms (connecting: 2.2ms;
cutting down:2.2ms)Light850nm infrared(modulated)Action Mode
Selecting light on /dark on by product modelControl outputNPN open
collector, load voltage: Max.30VDC,load current : Max.150mA,voltage
drop: Max.1.5VDC;PNP open collector,output voltage: Ue-1.5V,load
current: Max.150mA;IndicatorAction indicator: RedProtection
circuitReverse polarity, short circuit
protectionAnti-interference±2KVanalog square wave
interference(pulse width: 15ms)Ambient brightnessSunlight:
Max.100000lux Fluorescent: Max.5000luxAmbient temperature-20ºC~60ºC
(No-freezing),Storage: -25ºC~70ºCAmbient humidity0~90%RHHousing
materialHousing: ABS Cable: PVCShape and size As
dimensionCableEmitter: Black, Receiver: Grey Φ3.4mm²;
3×0.12mm²Protection ratingIP67 (IEC) PT12 product
selection tableProductSeriesSupply VoltageSpot DiameterDetection
RangeProductModelPT12T/V/U10~30V
DCΦ440mm(10m)10mPT12T-10M-NDPT12T-10M-NLPT12T-10M-PDPT12T-10M-PLPT12V-10M-NDPT12V-10M-PDΦ400mm(5m)5mPT12U-5M-NDPT12U-5M-NLPT12U-5M-PDPT12U-5M-PLPT12TWΦ850mm(5m)10mPT12TW-10M-NDPT12TW-10M-NLPT12TW-10M-PDPT12TW-10M-PL
Installation InstructionsProduct Application
Packaging & Shipping CertificationsProduct self-inspection
steps1. Detect whether the installation position of the object and
the proximity sensor has deviated, slacked, or skewed; whether
there is slack, poor contact, or disconnection in the wiring and
connection parts2. Whether there is adhesion or accumulation of
metal dust, etc.3. Is there any abnormality in using temperature
conditions and environmental conditions?4. Set whether the flashing
of the display lamp type is abnormal.If you must be careful not to
disassemble and repair by yourself during the inspection, and to
easily find out the fault, you can investigate the operating state
of the sensor through the connection with the portable detector,
and then repair it according to the situation.In order to make the
photoelectric sensor work stably for a long time, it should be
regularly checked with the same contents as the general control
equipment to maintain its long-term function. The photoelectric
sensor can also be stocked. Once a problem with the photoelectric
sensor is found, we can replace it in time without affecting the
use of the sensor.What is a photoelectric sensor?Photoelectric
sensors, also known as photo eyes, emit a beam of light that is
used to detect the presence or absence of items and equipment or
changes in surface conditions. When the emitted light is
interrupted or reflected by the object, the change in light
patterns is measured by a receiver and the target object or surface
is recognized. Photoelectric sensors are very common in industrial
manufacturing, such as material handling, packaging, food and
beverage, medical, and many others.Depending on the style selected,
they can be used with or without a reflector, and be
self-contained, long-range, heavy-duty, or compact. There are much
different housing and mounting options to offer a correct fit that
meets the demands of each application. They perform a wide variety
of tasks and some of them can even be used in harsh
environments. Company ProfileAdvantage:Being
professional:20years experience in manufacturing and a professional
R&D teamQuality Guarantee: QA&QC department to control the
quality6,000 square plantThe R&D team of nearly 20 peopleMore
than 20 patentsQuicker shipment and cargo protectionThe customized
product can be acceptableProviding free samplesExcellent
teamworkThe inquiry will be replied to in 2 hours.Q: Is the
product shipped and arrive fast?A: The production cycle for large
quantities of products takes 15-30 days, depending on the
product.Q: Can you provide professional advice promptly?A: We have
a professional technical team that can patiently help you answer
all professional questions.Q: Can you provide customized
products/services?A: Yes, we can provide customized products, but
the customization needs to meet a certain quantity.Q: How is the
quality of the product? Is the quality stable?A: G-TEK Sensors has
been focusing on the sensor f
Related products about Mini Shape Photo Sensor, Anti-Pintch Security Sensor for Automatic Door
- 10-30V Capacitive Inductive Proximity Switch for Laser Engraving Machine
- 10-30V Capacitive Inductive Proximity Switch for Laser Engraving Machine
- IP67 Capacitive Inductive Proximity Switch for Laser Engraving Machine
- IP67 Capacitive Inductive Proximity Switch for Laser Engraving Machine
- 30-1000mm NPN Small Blind Area Background Suppression Diffuse Reflection Photoelectric Sensor, Photo Sensor for Automated Assembly Line and Logistics Conveyor
- 30-1000mm NPN Small Blind Area Background Suppression Diffuse Reflection Photoelectric Sensor, Photo Sensor for Automated Assembly Line and Logistics Conveyor
- No Blind Are Type4 Infrared Safety Light Curtain, IR Beam Sensor, Safety Screen for Security Alarm System and Infrared Safety Screen
- No Blind Are Type4 Infrared Safety Light Curtain, IR Beam Sensor, Safety Screen for Security Alarm System and Infrared Safety Screen